同花顺凹口平量图指标公式

[复制链接]
查看123 | 回复0 | 2021-8-20 23:09:31 | 显示全部楼层 |阅读模式

xgx7:=ABS((VOL-REF(VOL,7))/REF(VOL,7))<0.04 AND
VOL>1.8*REF(VOL,2) AND
REF(VOL,1)<REF(VOL,7) AND
REF(VOL,2)<REF(VOL,7) AND
REF(VOL,3)<REF(VOL,7) AND
REF(VOL,(7-3))<REF(VOL,7) AND
REF(VOL,(7-2))<REF(VOL,7) AND
REF(VOL,(7-1))<REF(VOL,7);
xgx8:=ABS((VOL-REF(VOL,8))/REF(VOL,8))<0.04 AND
VOL>1.8*REF(VOL,2) AND
REF(VOL,1)<REF(VOL,8) AND
REF(VOL,2)<REF(VOL,8) AND
REF(VOL,3)<REF(VOL,8) AND
REF(VOL,(8-3))<REF(VOL,8) AND
REF(VOL,(8-2))<REF(VOL,8) AND
REF(VOL,(8-1))<REF(VOL,8);
xgx9:=ABS((VOL-REF(VOL,9))/REF(VOL,9))<0.04 AND
VOL>1.8*REF(VOL,2) AND
REF(VOL,1)<REF(VOL,9) AND
REF(VOL,2)<REF(VOL,9) AND
REF(VOL,3)<REF(VOL,9) AND
REF(VOL,(9-3))<REF(VOL,9) AND
REF(VOL,(9-2))<REF(VOL,9) AND
REF(VOL,(9-1))<REF(VOL,9);
xgx10:=ABS((VOL-REF(VOL,10))/REF(VOL,10))<0.04 AND
VOL>1.8*REF(VOL,2) AND
REF(VOL,1)<REF(VOL,10) AND
REF(VOL,2)<REF(VOL,10) AND
REF(VOL,3)<REF(VOL,10) AND
REF(VOL,(10-3))<REF(VOL,10) AND
REF(VOL,(10-2))<REF(VOL,10) AND
REF(VOL,(10-1))<REF(VOL,10);
xgx11:=ABS((VOL-REF(VOL,11))/REF(VOL,11))<0.04 AND
VOL>1.8*REF(VOL,2) AND
REF(VOL,1)<REF(VOL,11) AND
REF(VOL,2)<REF(VOL,11) AND
REF(VOL,3)<REF(VOL,11) AND
REF(VOL,(11-3))<REF(VOL,11) AND
REF(VOL,(11-2))<REF(VOL,11) AND
REF(VOL,(11-1))<REF(VOL,11);
xgx12:=ABS((VOL-REF(VOL,12))/REF(VOL,12))<0.04 AND
VOL>1.8*REF(VOL,2) AND
REF(VOL,1)<REF(VOL,12) AND
REF(VOL,2)<REF(VOL,12) AND
REF(VOL,3)<REF(VOL,12) AND
REF(VOL,(12-3))<REF(VOL,12) AND
REF(VOL,(12-2))<REF(VOL,12) AND
REF(VOL,(12-1))<REF(VOL,12);
xgx: xgx7=1 OR xgx8=1 OR xgx9=1 OR xgx10=1 OR xgx11=1 OR xgx12=1;

202108202226.jpg

202108202226.jpg

 

回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则