|
以下是通达信最佳启动优化版+副图指标 双管齐下（无源码的请下载附件导入）
使用说明：
如果想让信号岀的早一点，可调节源码内前两行MACD的参数，例如把(9,150,12)改为(15,26,5)。
1：优化了原来macd的柱子和两条线，用红绿色表示，看起来更明显！
2：在绿线没有变红线之前，不要盲目抄底，容易被套！
3：同样，改变源码内macd的参数可使灵敏，但越灵敏失误也会增多！
4：柱子变红，线也变红，同时也出信号，这时进场也不晚！
{最佳启动}
DIF:EMA(CLOSE,9)-EMA(CLOSE,150),NODRAW;
DEA:EMA(DIF,12),NODRAW;
MACD:2*(DIF-DEA),COLORSTICK;
DIK:4*DIF-3*DEA,COLORYELLOW;
DED:=EMA(DIK,1),COLORGREEN;
IF(C>DED,DED,DRAWNULL),COLORRED,LINETHICK3;
IF(DED<=REF(DED,1),DED,DRAWNULL),COLORGREEN,LINETHICK3;
启动点:=MACD<0 AND MACD>REF(MACD ,1) AND REF(MACD ,1)<REF(MACD ,2)
AND REF(MACD ,2)<REF(MACD ,3)
AND REF(MACD ,3)<REF(MACD ,4);
STICKLINE(启动点,8,MACD,2,0),COLORMAGENTA;
分界线:0,COLORFF00FF;
DRAWICON(启动点,20,11);
STICKLINE(MACD>REF(MACD,1) AND MACD>0,0,MACD,1.8,0),COLOR000055;
STICKLINE(MACD>REF(MACD,1) AND MACD>0,0,MACD,1.1,0),COLOR000099;
STICKLINE(MACD>REF(MACD,1) AND MACD>0,0,MACD,0.6,0),COLOR0000BB;
STICKLINE(MACD<=REF(MACD,1) AND MACD>0,0,MACD,1.8,0),COLOR40FF00;
STICKLINE(MACD<=REF(MACD,1) AND MACD>0,0,MACD,1.1,0),COLOR40FF00;
STICKLINE(MACD<=REF(MACD,1) AND MACD>0,0,MACD,0.6,0),COLOR40FF00;
STICKLINE(MACD>REF(MACD,1) AND MACD<0,0,MACD,1.8,0),COLOR000055;
STICKLINE(MACD>REF(MACD,1) AND MACD<0,0,MACD,1.1,0),COLOR000099;
STICKLINE(MACD>REF(MACD,1) AND MACD<0,0,MACD,0.6,0),COLOR0000BB;
STICKLINE(MACD<=REF(MACD,1) AND MACD<0,0,MACD,1.8,0),COLOR40FF00;
STICKLINE(MACD<=REF(MACD,1) AND MACD<0,0,MACD,1.1,0),COLOR40FF00;
STICKLINE(MACD<=REF(MACD,1) AND MACD<0,0,MACD,0.6,0),COLOR40FF00;
{选股公式}
DIF:=EMA(CLOSE,12)-EMA(CLOSE,150);
DEA:=EMA(DIF,9);
MACD:=(DIF-DEA)*2;
启动点:MACD<0 AND MACD>REF(MACD ,1) AND REF(MACD ,1)<REF(MACD ,2)
AND REF(MACD ,2)<REF(MACD ,3)
AND REF(MACD ,3)<REF(MACD ,4);
65077661.jpg
650311957.jpg
650400151.jpg
|
